Posts Tagged ‘Banding’

Edge Banding Machines

September 20th, 2016
washington bands
by WSDOT

Edge Banding or Edgebanding can be made of different materials (PVC, ABS, acrylic, melamine, wood or wood veneer). It is used in carpentry and furniture-making. Edge banding is used to cover the exposed sides of materials such as plywood, particle board or MDF, giving the appearance of a solid (or more valuable) material. Edge banding can also be used instead of features such as face frames or molding. Edgebandings typically come with a primer, which acts like a bonding agent between the adhesive and the substrate.

 

Thicker edge banding requires a slight concavity to provide a tight glue line. The thickness can vary from .018″ to 5mm or even more. Edgebanding can be applied to the substrate by using hot melt adhesives. Hot melt adhesives can be water or solvent based and they can consists of different raw materials (EVA, PUR, PA, APOA, PO). The machine that applies the edge banding is called edgebander. An edgebander bonds the edge banding to the substrate, trims leading and trailing edge, trims top and bottom flush, scraps any surplus and buffs the edge.

 

Edge banding machines typically come with a primer, which acts like a bonding agent between the adhesive and the substrate. Thicker edge banding requires a slight concavity to provide a tight glue line. The thickness can vary from .018″ to 5mm or even more. Edge banding can be applied to the substrate by using hot melt adhesives. An edge bander bonds the edge banding to the substrate, trims leading and trailing edge, trims top and bottom flush, scraps any surplus and buffs the edge

 

There are three ways to attach edge banding to a project. One is a self-sticking method, similar to applying wallpaper. The other method of applying edge banding is to press it on with a low temperature clothing iron. To avoid getting glue on the iron, aluminum foil should be placed between the project and the iron. The final method for attaching edge banding is to coat it and the project surface with contact cement. The two materials instantly bond when they are pressed together with the help of a roller

 

This edge banding machine provides better looks of the furniture and interior decoration in residential and commercial premises.

 

These edge tapes can be replaced as they are readily available in the market. These machines are specially designed for doing the banding operation on table tops, kitchen cabinets, various types of boards, etc. The capacity glue of these edge banding machines come with a 3 kg capacity glue pot which in turn with the help of heating element the do not allow the bonding chemical to dry into solid state. The glue is applied on one side of the edge tape and immediately fixed to the work piece, before the glue dries.

 

For more information on Edge Banding Machines you can visit http://www.homag-india.com/

This is Jon from Indian SEO, you can check Homag India Website for Woodworking machines.

Music | Posted by Fabrice Dollmach

Edge Banding Machine

September 14th, 2016

Edge banding is commonly used in home decorating. It is a veneer product comprised of strips of covering and sold in rolls. An extrusion manufacturing process allows edge banding to be made in different widths and thicknesses to match any project, whether it is solid, wood grain, metallic, or patterned. Therefore, rolls of edge banding are available in a variety of types and sizes.

 

Edge banding is commonly used with wood projects and intended to help the user change the style and look of the grain in the wood. A plywood table, for example, can be changed to look like maple walnut with the help of edge banding.

 

Edge banding is available in thin strips. It is easy to cut to shape in order to fit the project. When applying edge banding, it is best to cut it into larger pieces first. This way, it is easier to trim the edge banding down to fit if a placement mistake occurs. A clean and smooth surface is required before applying edge banding. If dust and sand residue are on the surface, the edge banding may not stick to the surface properly.

 

The more an edge-bander costs the more the discussion of buying it used comes into play. In the case of high capacity banders, a new bander can cost six figures, which is enough to dampen on a person’s plans to take their woodworking operation to the next level. But purchasing the bander used can result in a 30 percent or more reduction of its original price. In addition, many sellers of used woodworking machinery offer attractive financing. For woodworkers that have only operated a small woodshop that contained low capacity woodworking machinery, the idea of buying used woodworking machines to start a new operation can seem contrary. But it’s important to remember that industrial grade woodworking machinery is designed to last significantly longer than domestic grade and lower commercial grade machinery.

 

Buying tips

It’s not as easy as it might sound, and there are a few things that you should watch out for. The first and number one thing is to watch out for the Unbelievable Bargain. No such thing exists. If it’s unbelievable then there’s something wrong somewhere. Of course they are running some type of clearance. Now if you run across a bargain and it’s a well known brand you should snap up the tools immediately. These tools at bargain prices are rare, so get them when you can.

 

Also if you’re purchasing these tools for somebody who’s been at it for quite a hefty sum of time then the last thing that you’ll want to do will be to give them lower-ranking grade carpenter tools. Something which comes in a set might be good for the novice who is just starting and thus has no clear idea of what they need, but that unquestionably won’t do for the experienced carpenter. They need the good tools for several reasons and yes one might be for the ego.

 

But if you have trouble deciding which set of carpenter tools to get ask a friendly sales person for advice and more often than not you’ll leave the shop satisfied that you came forth with the real thing. You can also buy a gift card to their favorite tool store. You can certainly know the recipient of the gift will be happy for the first class gift you gave them.

For more information on Edge Banding Machine you can visit http://www.homag-india.com/

This is Jon from Indian SEO, you can check Homag India Website for Woodworking machines.

Find More Washington Bands Articles

Music | Posted by

Local Community Banding Together to Harness the Power of the Sun

March 18th, 2011

Local Community Banding Together to Harness the Power of the Sun

Although solar heating can dramatically slash home utility bills and has tremendous environmental benefits, converting to solar is often too cost-prohibitive for many home owners.  A group of homeowners in Mt. Pleasant, a suburb outside of Washington D.C., have realized though that there is strength, and more importantly, savings, in numbers.

Seventy-five homeowners in the Mount Pleasant neighborhood have banded together in order to help save money as they convert their homes to solar energy.  This cooperative represents a growing trend across the United States to encourage residents to use solar rather than fossil fuel to power their homes.  Unfortunately, the cost to convert to solar can be quite expensive with the cost of panels ranging from ,000 to ,000 depending on the size of the system.  By working together the cooperative has managed to get group discounts from solar panel installers and helped each other understand how to utilize government rebate programs. 

According to Anya Schoolman, one of the Mount Pleasant Cooperative Founders, working together and making the most of the government programs has allowed for dramatic results, There is a 30 percent federal tax credit for going solar for residential and that makes a huge difference in the cost and then there are a number of state level incentives.  Schoolman goes on to say that cooperative homeowners have seen their electrical bills go down by as much as two-thirds and the local electric company grants homeowners credit when their solar system generates more energy than they use. 

It is exactly this type of initiative that we would love to see from all of our customers, says Blas Pina, Director of Natural Gas for MXenergy, one of the nation’s leading independent energy suppliers.  By working together these residents have found a way to overcome one of the major hurdles of solar energy conversion.  If more communities where able to replicate this effort it could have a tremendous impact on our energy future and our environment. 

Some people might find it hard to understand why an energy provider would be so supportive of solar conversion for its customers, but Pina says the support fits perfectly with MXenergy’s overall philosophy and mission.

We say that we are an energy company that wants to put itself out of business and we mean that, says Pina.  We are members of this planet first and members of an energy company second.  There can be no doubt that the conversion to more sustainable energy represents huge benefits for our world.  It is our goal at MXenergy to help our customers be as energy efficient as possible and to continually be searching for new energy saving technologies for the future. 

Harnessing the power of the sun really is our best solution to attain a stable energy source that is really un ending. It does not have to be replenished or re grown or any such thing. Simply put as long as we have access to the sun we have a source of energy that will never disappear if we can ever find a way to harness its power.

For information energy conservation consider visiting mxenergy wizard for an energy audit. If you want to contribute to keeping mother earth visit an mxenergy initiative like mxearth and buy carbon offsets.

Article from articlesbase.com

Music | Posted by admin
%d bloggers like this: