Posts Tagged ‘Edge’

Edge Banding Machines

September 20th, 2016
washington bands
by WSDOT

Edge Banding or Edgebanding can be made of different materials (PVC, ABS, acrylic, melamine, wood or wood veneer). It is used in carpentry and furniture-making. Edge banding is used to cover the exposed sides of materials such as plywood, particle board or MDF, giving the appearance of a solid (or more valuable) material. Edge banding can also be used instead of features such as face frames or molding. Edgebandings typically come with a primer, which acts like a bonding agent between the adhesive and the substrate.

 

Thicker edge banding requires a slight concavity to provide a tight glue line. The thickness can vary from .018″ to 5mm or even more. Edgebanding can be applied to the substrate by using hot melt adhesives. Hot melt adhesives can be water or solvent based and they can consists of different raw materials (EVA, PUR, PA, APOA, PO). The machine that applies the edge banding is called edgebander. An edgebander bonds the edge banding to the substrate, trims leading and trailing edge, trims top and bottom flush, scraps any surplus and buffs the edge.

 

Edge banding machines typically come with a primer, which acts like a bonding agent between the adhesive and the substrate. Thicker edge banding requires a slight concavity to provide a tight glue line. The thickness can vary from .018″ to 5mm or even more. Edge banding can be applied to the substrate by using hot melt adhesives. An edge bander bonds the edge banding to the substrate, trims leading and trailing edge, trims top and bottom flush, scraps any surplus and buffs the edge

 

There are three ways to attach edge banding to a project. One is a self-sticking method, similar to applying wallpaper. The other method of applying edge banding is to press it on with a low temperature clothing iron. To avoid getting glue on the iron, aluminum foil should be placed between the project and the iron. The final method for attaching edge banding is to coat it and the project surface with contact cement. The two materials instantly bond when they are pressed together with the help of a roller

 

This edge banding machine provides better looks of the furniture and interior decoration in residential and commercial premises.

 

These edge tapes can be replaced as they are readily available in the market. These machines are specially designed for doing the banding operation on table tops, kitchen cabinets, various types of boards, etc. The capacity glue of these edge banding machines come with a 3 kg capacity glue pot which in turn with the help of heating element the do not allow the bonding chemical to dry into solid state. The glue is applied on one side of the edge tape and immediately fixed to the work piece, before the glue dries.

 

For more information on Edge Banding Machines you can visit http://www.homag-india.com/

This is Jon from Indian SEO, you can check Homag India Website for Woodworking machines.

Music | Posted by Fabrice Dollmach

Edge Banding Machine

September 14th, 2016

Edge banding is commonly used in home decorating. It is a veneer product comprised of strips of covering and sold in rolls. An extrusion manufacturing process allows edge banding to be made in different widths and thicknesses to match any project, whether it is solid, wood grain, metallic, or patterned. Therefore, rolls of edge banding are available in a variety of types and sizes.

 

Edge banding is commonly used with wood projects and intended to help the user change the style and look of the grain in the wood. A plywood table, for example, can be changed to look like maple walnut with the help of edge banding.

 

Edge banding is available in thin strips. It is easy to cut to shape in order to fit the project. When applying edge banding, it is best to cut it into larger pieces first. This way, it is easier to trim the edge banding down to fit if a placement mistake occurs. A clean and smooth surface is required before applying edge banding. If dust and sand residue are on the surface, the edge banding may not stick to the surface properly.

 

The more an edge-bander costs the more the discussion of buying it used comes into play. In the case of high capacity banders, a new bander can cost six figures, which is enough to dampen on a person’s plans to take their woodworking operation to the next level. But purchasing the bander used can result in a 30 percent or more reduction of its original price. In addition, many sellers of used woodworking machinery offer attractive financing. For woodworkers that have only operated a small woodshop that contained low capacity woodworking machinery, the idea of buying used woodworking machines to start a new operation can seem contrary. But it’s important to remember that industrial grade woodworking machinery is designed to last significantly longer than domestic grade and lower commercial grade machinery.

 

Buying tips

It’s not as easy as it might sound, and there are a few things that you should watch out for. The first and number one thing is to watch out for the Unbelievable Bargain. No such thing exists. If it’s unbelievable then there’s something wrong somewhere. Of course they are running some type of clearance. Now if you run across a bargain and it’s a well known brand you should snap up the tools immediately. These tools at bargain prices are rare, so get them when you can.

 

Also if you’re purchasing these tools for somebody who’s been at it for quite a hefty sum of time then the last thing that you’ll want to do will be to give them lower-ranking grade carpenter tools. Something which comes in a set might be good for the novice who is just starting and thus has no clear idea of what they need, but that unquestionably won’t do for the experienced carpenter. They need the good tools for several reasons and yes one might be for the ego.

 

But if you have trouble deciding which set of carpenter tools to get ask a friendly sales person for advice and more often than not you’ll leave the shop satisfied that you came forth with the real thing. You can also buy a gift card to their favorite tool store. You can certainly know the recipient of the gift will be happy for the first class gift you gave them.

For more information on Edge Banding Machine you can visit http://www.homag-india.com/

This is Jon from Indian SEO, you can check Homag India Website for Woodworking machines.

Find More Washington Bands Articles

Music | Posted by

Easter with Waters Edge

March 11th, 2013

Easter with Waters Edge
Event on 2013-03-31 09:30:00

Celebrate Easter with us on March 30 or March 31. With 15 identical services on 3 campuses, we have a seat for you at a time that fits in your schedule. Tickets are free, but you do need one to attend. Simply choose your campus and download the number of tickets you need!

Childcare is provided on all campuses for 6 weeks-prek.  

Waters Edge Church Newport News
836 J Clyde Morris Blvd
Newport News, VA 
Get Directions

March 31:  9:30, 11:00 AM & 12:30 PM

Other locations and times:

Waters Edge Church Hampton
2011 Cunningham Driv e
Hampton, VA
Get Directions

March 30:  6:00 PM 
March 31:  9:30, 11:00 AM & 12:30 PM

Waters Edge Church Yorktown
6830 George Washington Mem Hwy
Yorktown, VA 
Get Directions

March 30: 4:30 & 6:00 PM   
March 31:  8:00, 9:30, 11:00 AM, 12:30, 4:30 & 6:00 PM 

at Newport News Campus
836 J Clyde Morris Blvd
Newport News, United States

Washington | Posted by admin

Screen Guild Theater: Edge of Darkness / You Belong to Me / George Washington Slept Here

December 31st, 2012

Edge of Darkness John Garfield, Maureen O’Hara, Ralph Morgan You Belong to Me Mary Astor, Don Ameche George Washington Slept Here Carole Landis, Jack Carson Carole Landis (January 1, 1919 — July 5, 1948) was an American film and stage actress, who worked as a contract-player for Twentieth Century-Fox in the 1940s. Her breakthrough role was as the female lead in the 1940 film One Million BC, with United Artists. She died of an intentional drug overdose the age of 29 in 1948. After her death, newspapers headlined stories about the actress, some with the title “The Actress Who Could Have Been…But Never Was.” Her 1937 film debut was as an extra in A Star Is Born; she also appeared in various horse operas.[1] She posed for hundreds of cheesecake photographs.[1] She continued appearing in bit parts until 1940 when Hal Roach cast her as a cave girl in One Million BC. The movie was a sensation and turned Landis into a star. A press agent nicknamed her “The Ping Girl” (because “she makes you purr”).[1] Landis appeared in a string of successful films in the early ’40s, usually as the second female lead. In a time when the singing of many actresses was dubbed in, Landis’s own voice was considered good enough and was used in her few musical roles. Landis landed a contract with Twentieth Century-Fox and began a sexual relationship with Darryl F. Zanuck. She had roles playing opposite fellow pin-up girl Betty Grable in Moon Over Miami and I Wake Up Screaming, both in 1941. When

Music | Posted by admin

Christmas With Waters Edge

December 1st, 2012

Christmas With Waters Edge
Event on 2012-12-23 08:00:00

Celebrate Christmas with us on December 23 or December 24. With 14 identical services on 3 campuses, we have a seat for you at a time that fits in your schedule. Tickets are free, but you do need one to attend. Simply choose your campus and download the number of tickets you need!

Childcare is provided on all campuses for 6 weeks – Pre-K.

Waters Edge Church Yorktown
6830 George Washington Mem Hwy
Yorktown, VA 
Get Directions
Dec 23:  8:00, 9:30 & 11:00 AM and 4:30 and 6:00 PM
Dec 24:  1:30 & 3:00 PM  

Other locations and times:

Waters Edge Church Hampton
2011 Cunningham Drive
Hampton, VA
Get Directions
Dec 23:  9:30 & 11:00 AM
Dec 24:  1:30 & 3:00 PM

Waters Edge Church Newport News
836 J Clyde Morris Blvd
Newport News, VA 
Get Directions
Dec 23:  9:30 & 11:00 AM
Dec 24:  1:30 PM

at Yorktown Campus
6830 George Washington Memorial Hwy
Yorktown, United States

Washington | Posted by admin

Edge of the Web Radio Expands Reach with Marketing TechBlog and Freedom 95

November 26th, 2012

Edge of the Web Radio Expands Reach with Marketing TechBlog and Freedom 95
The Edge of the Web Radio Broadcast is moving to Freedom 95.9FM and 950AM beginning Saturday. November 24. With the addition of Marketing TechBlog's Douglass Karr, the weekly broadcast will offer new feature segments and a fresh updated format.
Read more on PR Web (press release)

Disney Movies Online to shut down
Disney is shutting down its Web movie service, Disney Movies Online, saying the site wasn't keeping up with user demands. In an email to users, the company said the site would be closed as of 12/31. The site allowed visitors to buy and rent movies from …
Read more on Radio & Television Business Report

RUKO G10 3-1/2-Inch Blade Folding Knife with Plain Edge Vented Handle (3.98-Oz.)

July 25th, 2011

RUKO G10 3-1/2-Inch Blade Folding Knife with Plain Edge Vented Handle (3.98-Oz.)

  • Razor Sharp 440A Stainless Steel 3-1/2-Inch Drop-Point Blade, Non-Glare Bead Blast Finish, Liner Lock design
  • Durable Non-Slip Textured G10 Handle for secure handling
  • Stainless Steel Thumb Stud and Pocket Clip for easy opening and secure carry
  • Blade: 3-1/2-Inch, Closed: 4-1/2-Inch, Weight: 3.98 oz
  • Lifetime Warranty

RUKO RUK0027 Vented G10 Handle Folding Knife. The RUK0027 features a Razor Sharp 440A Stainless Steel 3-1/2″ Drop-Point Blade, Non-Glare Bead Blast Finish, Liner Lock design; Durable Non-Slip Textured G10 Handle for secure handling; Stainless Steel Thumb Stud and Pocket Clip for easy opening and secure carry; Blade: 3-1/2″, Closed: 4-1/2″, Weight: 3.98 oz; Lifetime Warranty

List Price: $ 22.50

Price: $ 12.99

More 98.3 Products

Washington | Posted by admin

Satellite Car Radio Is Cutting Edge

February 6th, 2010

Satellite car radio is a growing industry in today’s market place. Most common car audio manufacturers have adapted their products to include satellite car radio services. This allows drivers a wider range of music for their listening pleasure making the travel place a much more entertaining place to be.

When it comes to the dreariness and monotony of the daily commute for those employed individuals, satellite car radio can offer a fresh breath of air with their wide variety of entertainment with the convenience of being mobile. Many morning show personalities have opted to take the satellite radio route as opposed to limiting themselves to syndication by normal radio station broadcasters. Satellite car radio has given the on-air personalities a wider range of listeners during the daily commute.

Because of the nature of today’s workplace and the face-paced world around us, the need to be able to have variety while on the go has caused a boom in the satellite car radio industry spawning service providers such as Sirius and XM radio along with many not so well known providers of satellite radio service. This has put a drive (no pun intended) into car audio manufacturers to make their products more of satellite car radio instead of the normal car audio systems that limit buyers to local analog radio transmissions, compact disc, and cassette capabilities.

With technologies today growing and expanding at the rate they are, the industry has grown leaps and bounds not only in the forms of media car audio equipment will accept but integrating things from our every day lives such as Mp3 capabilities, and Satellite capabilities. There are very few manufactures now that do not offer some form of satellite car radio. Your typical car stereos and the radio capabilities have been far exceeded and become a profitable market for satellite providers.

These days when you are shopping for car audio systems, you can find satellite car radio units for near as close of cost as you can your typical car audio systems with standard analog capabilities. Why wouldn’t you go for a satellite car radio instead of your plain run of the mill car stereo? When for only a few pennies on the dollar more you can in with the times and become a listener of a satellite car radio, giving you more choice when you want it, with the technologies of today’s leading industry of satellite technologies.

With all of the options you have in today’s car audio industry I see no reason to go with your standard car radio options and not give in to the growing demand of satellite car radio. Not only is it and advantage cost-wise but it also targets every genre of music, news, and talk radio you could think of. If you are looking to get out of the boredom of your daily commute, or just looking to appease the family when going on vacation I would strongly recommend that you look into satellite car radio as a great alternative for your listening needs.

Radio | Posted by admin